Hydraulic Bender Model L (90°) “Multiplo” for CTCs and Straps

Bend them all together

Precision in Bending

The Hydraulic Bender “Multiplo” Model L (90°) was designed to bend the multiple amount of CTCs and Straps to 90° without damaging the copper wrapping paper.

For now there is only 1 type of Hydraulic Benders Model L (90°) :

L20M (Multiplo) is a unique and exclusive model which guarantee the bending of multiple amount of copper straps at the same moment without damaging them, it bends copper with the following dimensions: A min 4 mm, A max 15 mm, B min 2 mm, B max 20 mm, R 12.5 mm.

Technical Information

Normally we provide our clients with the Pump Combination needed for Bender to start working. The pump should be connected to the compressed air at the factory of the client, at 8 bars, with a consumption of 340 L/Min. After the connection, the Hydraulic Bender is immediately operational. The pedal, which is installed directly on the pump, along with the manometer, is connected to the Bender via a high-pressure hose.

Generally Hydraulic Bender does not need any maintenance. The only one thing that is important – is to check the level of oil. The oil used by the hydraulic pump is ISO 46 hydraulic oil.

As well, we provide our clients with the Balancer. It is needed to make the job of the operator easier. So, operator shouldn’t keep it in hands all the time, because it is not very easy to keep such a tool in hands for long, it’s a bit heavy.

In case of broke of some part, you can always find replacement parts at Tecnica 80.