The Hydraulic Bender “Multiplo” Model L (90°) was designed to bend the multiple amount of CTCs and Straps to 90° without damaging the copper wrapping paper.
For now there is only 1 type of Hydraulic Benders Model L (90°) :
L20M (Multiplo) is a unique and exclusive model which guarantee the bending of multiple amount of copper straps at the same moment without damaging them, it bends copper with the following dimensions: A min 4 mm, A max 15 mm, B min 2 mm, B max 20 mm, R 12.5 mm.
Normally we provide our clients with the Pump Combination needed for Bender to start working. The pump should be connected to the compressed air at the factory of the client, at 8 bars, with a consumption of 340 L/Min. After the connection, the Hydraulic Bender is immediately operational. The pedal, which is installed directly on the pump, along with the manometer, is connected to the Bender via a high-pressure hose.
Generally Hydraulic Bender does not need any maintenance. The only one thing that is important – is to check the level of oil. The oil used by the hydraulic pump is ISO 46 hydraulic oil.
As well, we provide our clients with the Balancer. It is needed to make the job of the operator easier. So, operator shouldn’t keep it in hands all the time, because it is not very easy to keep such a tool in hands for long, it’s a bit heavy.
In case of broke of some part, you can always find replacement parts at Tecnica 80.
The bender only needs oil, while the pump we normally supply needs compressed air at 8 bars, with a consumption of 340 L/Min.
The oil used by the hydraulic pump is ISO 46 hydraulic oil.
The pedal, which is installed directly in the pump we normally supply, is connected to the bender via a high-pressure hose.
Not manually. Hydraulic pump, need to be connected to the 8 bars compressed line. And the pump is immediately operational.
Replacement parts for Enerpac you can easily find in all around the world. Replacement parts for Hydraulic Bender you can always find at Tecnica80.
Generally Hydraulic Bender does not need any maintenance. The only one thing that is important – is to check the level of oil.
6d Hydraulic Bender Model L (90°) “Variabile” for CTCs and Str...